Parent Directory	IMG_5547.JPG The original factory board.	IMG_5548.JPG The stock transformer.
IMG_5549.JPG The original sandwich layout (1/2).	IMG_5551.JPG The original sandwich layout (2/2).	IMG_5552.JPG Unmodified metal bottom.
IMG_5553.JPG Titanium coated bit.	IMG_5554.JPG Mmmm. Titanium.	IMG_5555.JPG First hole drilled (1/2).
IMG_5556.JPG First hole drilled (2/2).	IMG_5557.JPG Widened hole for slide switch.	IMG_5558.JPG Filing a little wider (1/2).
IMG_5559.JPG Filing a little wider (2/2).	IMG_5563.JPG About to drill the screw holes.	IMG_5565.JPG Drilling screw holes. (This took a while).
IMG_5567.JPG Photo of original and new transformers. I've started to wire them together.	IMG_5568.JPG Mostly wired together now.	IMG_5569.JPG New sandwich put in place with double-stick tape.
IMG_5570.JPG The final assembly (delta shifting things around a little).	IMG_5571.JPG Assembled for preliminary testing (no strain relief yet).	IMG_5572.JPG Another photo of first assembly.
IMG_5575.JPG Photo of the strain relief. What a pain. The new transformer was a little too high, so I had to pull it back apart and shift things around before I could put this in. *sigh*	IMG_5576.JPG Assembled with strain relief. Ready to put the switch label on.	IMG_5577.JPG The final assembly (bottom view).
IMG_5579.JPG The final assembly (front view).	trans_connection.tif The wiring diagram for the mod.